To present, organize or store different types of jewellery Dimensions: small - 9 x 10.50 x height 3cm / medium - 11.50 x 13.50 x height 3cm / large - 15 x 17 x height 3cm. Matter: solid exotic wood from responsible sectors. This beautiful set of jewelry displays will allow you to organize your bracelets, rings, necklaces, earrings and watches with...
Wooden notched bracelet holder finish "Vintage Black" Dimensions: height 40 x width 7 x depth 11cm approximately. Material: Solid exotic wood from forests managed by an environmental protection organization. Ceruse finish. This wooden display is very practical: it allows you to have many bracelets (minimum 9 if you put a bracelet per notch) with a minimum...
The essential presentation accessory to highlight your rings, in store or at home! Size: - Small: height 5.5cm x diameter 2.5cm approximately- Medium: height 7.5cm x diameter about 2.5cm- Large: 9.5cm x diameter about 2.5cm Material: exotic wood from responsible sectors. Finish "vintage black". Sold without accessories. Simple but effective, these...
Focus on your most beautiful pair of earrings! Dimensions: height 14 x width 8.5 x depth 4 cm approximately. Material: wood from controlled channels, "vintage black" finish. Artisanal creation entirely handmade. Other colors available. Earrings sold separately. A display dedicated to highlighting a particular pair of earrings This display is designed to...
Enhance your most beautiful earrings with this wooden display Dimensions: height 10 x width 7 x depth about 4 cm. Material: wood from controlled channels, vintage black finish. Artisanal creation entirely handmade. Other colors available. Earrings sold separately. Draw attention to a specific piece of jewelry This display is designed to highlight a pair...
Wooden jewelry display: quality and authenticity are at the rendezvousDimensions: height 30 x width 13 x depth about 5cm.Material: solid exotic wood from responsible sectors. Finish black cerused hue.The notched edges of this bust make it possible to store and highlight several necklaces without them getting tangled. This collared display is...
Ring display - 3 wooden conesTotal dimensions: height 7 x width 12 x depth 4cm approximately. Cone: height 6 x diameter 2.50cm approximately.Material: exotic wood from responsible sectors. Cerused black finish.Allows you to store and highlight several rings on a single support, each cone can itself wear several rings.Artisanal product in solid...
Wooden bracelet holders old-fashioned patinated finishDimensions: height 30 x width 7.5 x depth 9cm approximately.Material: Solid exotic wood from forests managed by an environmental protection organization. Cerused black finish.A practical, stable and space-saving wooden display: it allows you to store many bracelets (7 minimum if you only put one...
Ideal for jewelry professionals: Presentation cone for bracelets and watches Dimensions: height = 20cm, diameter = about 7cm. Material: Solid exotic wood from responsible sectors. Finish black cerused hue. In the world of jewelry displays, we found this cone-shaped display. Original and design, practical by its size, it allows to organize and highlight...
Show off your bracelets and watches with this vintage black display Dimensions: height 16cm x width 20cm x depth about 10cm. Diameter of the rush - about 4.5cm. Matter: exotic wood from planted forests. Craft creation: slight differences in appearance are possible compared to the model photographed. Jewelry professionals, create attractive stagings with...
Indispensable to showcase your jewelry Dimensions: height 25 x 14 x 6 cm approximately. Vintage black stained solid wood The notched edges of this display allow you to store and showcase several necklaces. Ideal for small surfaces, it does not take up space. Unlike a jewelry box, this bust helps organize multiple necklaces so they don't get tangled....
Dimensions : H 26cm Diameter 16cm What originality to this display jewelry in the shape of a parasol ! Allows you to store all kinds of earrings (studs and dangling). It takes up little space and can contain at least 11 pairs. Well developed, you can quickly find the earrings to pair with your outfit. In addition to being practical, this item will bring a...
Display bracelets and watches (4 rods) in wood finishing "black vintage". Dimensions : height 24.5 cm x width 30cm x depth 27.5 cm approximately. Solid wood satiny finish "black vintage". Can be disassembled for easy storage. Width of rings : XL= 30cm ; L = 25cm ; H = 20cm ; S = 15cm. Diameter of rods = 4.5 cm approximately. It allows you to store and...
Door-glasses / display glasses , original wood carved, satiny finish "black vintage". Dimensions : H15 x 12 x 5.5 cm approximately. Material : wood from streams regulated and traced. Handcrafted, respectful of man and the environment. Thanks to this original media, you will know at any time where you laid your glasses ! Opticians, vendors of prescription...
Door-rings. Display rings (13 cones) solid wood finish "black vintage". Allows to put in value of many rings on a single support ! It is also a storage very convenient for those who have a lot of jewelry. Handicraft product made of solid wood made entirely by hand. Dimensions : H 19 W 25 P 12,50 cm Display stand sold alone, without a jewel.
These hands of wood are ideal for storing your rings : combine in a jewelry tree display stand bracelet and a bust door necklace to create a storage space organized! They are also designed to serve as display cards, or to showcase your flyers, advertising or other DISPLAYS. By their finesse and elegance, you can put them into deco in the room that you...
Large display with bracelets and watches (6 rushes) in wood finish "vintage black". Dimensions: Height 52 x width 40 x depth 16 cm approximately - Diameter of the rods = 4.5 cm approximately. Solid wood painted and patinated by hand. This maxi display of 6 floors will allow you to highlight or store dozens of bracelets and watches. For professionals and...
Storage for rings in exotic wood finish "vintage black" Dimensions: height 6 x width 28 x depth 4cm approximately. Cone: height 6 x diameter 2.50cm approximately. Material: wood from responsible sectors. Finish "vintage black". Allows you to store and highlight many rings on a single support, each cone can itself wear several rings. Artisanal product in...
In the world of jewelry displays, we found this small cone-shaped carrier to highlight 1 or 2 pairs of buckles. Dimensions: H 15 L 8.50 D 3.7 cm approx. Material: exotic wood black patina finish "vintage" style. Metal rods. In addition to being practical, this pretty display stands out for its originality and design. For even more effect, pair it with a...
Wooden jewelry tree / removable earring display Dimensions: height 28 x width 27 x depth 9 cm approximately. Material: Solid exotic wood from responsible sectors, vintage black patina finish. Precious storage for your earrings (for all forms of clasp), you can hang at least 12 pairs to have at hand your favorite models. You can also hang some necklaces...
Storage / Display for bracelets and watches (4 rods) in wood finishing "black vintage". Dimensions : H 36 L 29 P 12 cm - Diameter rods = 4.5 cm approximately. The finish is "black vintage" is a whitewash of black applied on raw wood. Its on-trend style meets a great success currently. This display of 4 floors can be used to highlight / to store a large...
Bust display, jewelry necklace and earrings matching. Dimensions : H 35 x W 15 x d 7 cm approx. Handcrafted exotic wood, respectful of man and the environment. This display jewellery is ideal for showcasing your necklaces long or short, and their earrings assorted. The ears are pierced, which allows to hang on easily a pair of earrings. The finish is...
Large bust of presentation of necklaces in solid wood finish "vintage black" Dimensions: height 40 x width 15 x depth 7cm approximately. Material: Solid exotic wood from responsible sectors. Vintage black patina finish. The notched edges of this display make it possible to store and highlight several long or short necklaces. Its height will be useful to...
Display bracelets and watches (2 canes) wood finish "Black Vintage". Dimensions : H 25 L 25 P 18 cm. Width of the rods, = 20 and 25cm approximately. Diameter of rods = 4.5 cm approximately. Dismantles for easy transportation. The finish is "black vintage" fully patinated by hand will highlight the uniqueness of the watches and bracelets presented. This...
Great display for necklaces, bust , serrated wood finish "black vintage", for the presentation of multiple necklaces or chains. Dimensions : H50 x 20 x 12cm approximately. Material : exotic wood massive from sectors responsible. The notched edges of this display allow you to hang multiple necklaces, or sautoirs, which is useful for both the storage as the...
Great display stand for rings (24 cones) in wood finishing "black vintage". Handcrafted. Dimensions : H35 x L24 x P13 cm. Cones : H6 x diameter 2.50 cm. Material : exotic wood massive from sectors responsible. Allows you to store and showcase many rings on a single support, each cone can even wear several rings. The finish is "black vintage" contrast well...
Display bracelets and watches (2 canes) wood finish "black vintage". Dimensions : H 22 L 29 P 10 cm - Diameter rods = 4.5 cm approximately. Exotic wood massive from sectors responsible. This display allows to expose at least 10 to 15 bracelets or watches since the effective length of each rod is 24cm. Succomb to the original look of the finish "black...
Display jewelry professional, bust for necklace in solid wood finish "black vintage". Dimensions : 20 x 18 x H11cm approx. Material : exotic wood massive from sectors responsible. Key to the success of your storefronts and scenes : this bust exposes your necklaces "flat". Place it in the foreground, then place a bust a little over the top in the second...
Bust display stand in solid wood for enhancement of necklaces and pendants. Finish "black vintage" very on trend ! Dimensions : H25 x 14 x 6 cm approximately. Material : exotic Wood from channels responsible. The finish is "black vintage", fully patinated by hand, highlight the unique character of the collar presented. We recommend it to showcase the...
These hands carved wooden can be used to vacuum-pocket, to store your rings, or as display cards. Dimensions : 19 x 15 x H5,5cm approximately. Weight = 250g approx. Material : wood Suar from planted forests. Regardless of how you will use this object, its elegance will add value to what you want and attract the eye where you want it ! Wood Sculpture,...
Display bracelets and watches (3 rings) in wood finishing "black vintage". Dimensions : H 27 L 25 P 21 cm. Can be disassembled for easy storage. Width rings : wide = 25cm ; medium = 20cm ; small = 15cm. Diameter of rods = 4.5 cm approximately. This display allows you to store and highlight several bracelets, or watches with a small footprint ! Its finish...
Presentation cone "Vintage Black", for bracelets and watches Dimensions: height = 15cm, diameter = about 7cm. Material: Exotic wood from forests managed by an environmental protection organization. Patinated finish "Vintage Black". Artisanal product entirely handmade. Cultivate the style and identity of your jewelry shop with this wooden presentation...
Large display necklacebust wood ideal for presenting long necklaces, sautoirs or bolas of pregnancy. Dimensions : H50 x 17 x 7.5 cm approximately. Material : exotic wood massive from sectors responsible, finish-patina black vintage. A maxi display-50cm ideal for the development of long necklaces such as the bolas of pregnancy, or sautoirs. The finish is...
Display jewelry multi-function solid wood black-stained vintage. Very practical and clever, this fixture is composed of a bust with scoop neckline, a rod horizontal, and branches are pierced, which allows you to store or showcase one or several necklaces and bracelets, and up to 8 pairs of earrings. The black goes perfectly with gold jewelry or silver !...
Large display necklacebust wood ideal for presenting long necklaces, sautoirs or bolas of pregnancy. Dimensions : H60 x 18 x 8cm approximately. Material : exotic wood massive from sectors responsible, black, vintage. A maxi display-60cm ideal for the development of long necklaces such as the bolas of pregnancy, or sautoirs. On the photo, the necklace...
This pretty Hand of Buddha in carved wood allows you to store and showcase multiple rings. Dimensions (positioned vertically) : H18 x 7 x 6cm approximately. Material : exotic wood, carved by hand, finish black patina style "vintage". It is possible to put several rings on every finger. The hand can be raised to the horizontal or to the vertical....
Multifunction jewelry tree / storage for solid wood jewelry finish "vintage black". Dimensions: H 40 L 19 P 19 cm approx. Very practical and clever, this jewelry tree allows you to store or highlight several necklaces and bracelets. Jewelry professionals: this display will allow you to highlight necklace + bracelet adornments. Perfect to catch the eye of...
Artisanal jewelry tree in wood patinated finish "vintage black" Dimensions: height 40 x width 27 x depth 9 cm approximately. Material: Solid exotic wood from responsible sectors. Patina finish "vintage black". Precious storage for earrings (for all forms of clasps), you can hang at least 20 pairs, to always have your favorite models at hand. You can also...
Bust display necklace in wood. Display jewelry professional finish "black vintage" patina to the hand. Dimensions : H35 x 16 x 7.50 cm. Material : exotic wood, massif, from the sectors responsible. Give a display unique to your jewelry : With his inimitable style, the finish "black vintage" immediately draws the eye where you want it ! It is a treasure...
Bust display jewelry for enhancement of necklaces and pendants. Finish "black vintage" original and trendy. Dimensions : H30 x 15 x 8 cm approximately. Material : exotic wood massive from sectors responsible. Opt-in to the finish "black vintage" in order to emphasize the unique side of your necklaces in metal (copper, gold, silver,...), wood, or leather....
Bust exhibition for necklaces and pendants designed specially for the professionals, adopted by all the women ! Handcrafted in solid wood, color "black vintage". Dimensions : H30 x 18 x 10cm approximately. Ideal for storing and showcasing your necklaces and pendants, this model raised is distinguished by its original appearance and its excellent...
Display bracelets and watches composed of a support and of 3 rods, removable, wood-finish "black vintage". Dimensions : H 29 L 28 P 12 cm - Diameter rods = 4.5 cm approximately. The sobriety of the wood tinted in black is ideal for highlighting jewelry in gold, silver or colored. The patina of "vintage", gives it an industrial look very modern. This...
The professionals of the jewellery, as individuals who wish to exhibit their finery, enjoy our displays to handcrafted jewelry. In solid wood from forests that are replanted, these doors jewelry are carved on the island of Bali by artisans confirmed. Our displays are all uniq...
The professionals of the jewellery, as individuals who wish to exhibit their finery, enjoy our displays to handcrafted jewelry. In solid wood from forests that are replanted, these doors jewelry are carved on the island of Bali by artisans confirmed. Our displays are all unique and authentic.
Currently, we have developed 6 ranges of colors : white, raw, brown, black, black and vintage red. When you know how to choose your displays to jewelry, their sizes and their functions, you will be ready to determine the color that will most value your jewelry.
The doors-jewelry black vintage, like the display jewelry black, are ideal for jewelry in light colors as well as silver jewelry and gold. The black vintage is a classic black which a satiny finish have made her look old. These displays are appreciated for the exhibition of jewelry of the antique style, but is also suitable for all sorts of jewelry, excluding jewelry black and dark that will be less visible.
LessGood to know...
Par Corinne F. le 05 Jun 2023 :
Par Suzy R. le 05 Jun 2023 :